True   48″ TSSU Series Sandwich/Salad Prep Table w/ Refrigerated Base, 115v

The True TSSU-48-12-HC sandwich and salad prep table has a durable stainless steel front, top, and sides. A 11³⁄₄-inch-wide polyethylene cutting board spans the length of the prep table to provide a clean and durable surface where employees can assemble salads and sandwiches. Included with the unit, 12 sixth-size polycarbonate food pans sit in the top compartment. These pans are 4 inches deep, and the equipment also accommodates 6-inch-deep pans.

Since the refrigeration system uses R290 hydrocarbon refrigerant, the True TSSU-48-12-HC prep table is more environmentally friendly than models with traditional refrigerants. The unit’s capillary tube system provides accurate temperature recovery to maintain all held products between 33 and 41 degrees Fahrenheit. Electronically commutated evaporator and condenser fan motors offer improved energy efficiency and produce less heat than traditional motors. Each time the compressor turns on, the fan motor reverses direction for 20 seconds. This feature removes dust, dirt, and debris from the condensing coil, keeping it clean so the unit operates efficiently. Along with routine maintenance, this self-cleaning mechanism ensures the unit produces cool temperatures using minimal energy.

Product Details

• Includes 12 sixth-size, 4-in.-deep polycarbonate food pans
• Foam-insulated lid closes to keep products fresh and minimize condensation
• 11³⁄₄-in.-wide polyethylene cutting board runs the length of the front to provide a sanitary prep and cutting surface
• Uses R290 hydrocarbon refrigerant
• Temperature range: 33-41 degrees F
• Electronically commutated motors power the equipment’s condenser and evaporator fans, providing consistent airflow and improved energy efficiency compared to traditional technology
• Reverse condensing fan motor operates for 20 seconds upon compressor start up
• Service technicians can access condensing unit through the back of the cabinet to simplify service calls
• Cabinet is built with a rugged stainless steel top, front, and ends
• Aluminum back matches the finish of stainless components
• Interior is lined with sanitary, NSF-approved aluminum
• Heavy-duty stainless steel interior floor has coved corners to simplify cleaning
• Entire cabinet is insulated with polyurethane foam for cold air retention
• 4 PVC-coated shelves with 4 chrome-plated clips each
• Aluminum interior pilasters enable shelves to be adjusted in ¹⁄₂-in. increments

Self-closing Doors

• Stainless steel exterior
• Aluminum liner matches the cabinet interior
• 12-in. recessed handles have sheet metal interlocks to stay permanently attached
• Close on their own unless opened past 90 degrees, where they stay open to provide access for cleaning and stocking
• Magnetic gaskets ensure each door forms an airtight seal
• Gaskets can be removed without tools

Dimensions & Utilities

• Pans: 6⁷⁄₈ in. L x 6¹⁄₄ in. W x 4 in. D
• Shelves: 21⁹⁄₁₆ in. W x 16 in. D
• Overall: 48³⁄₈ in. W x 31¹⁄₈ in. D x 43 in. H
• 5.8 A, ¹⁄₃ HP
• 115 V/60 Hz/1 ph, 11-ft. cord with a NEMA 5-15 plug

 

Manufacturer	True Refrigeration
Cutting Board Depth (in)	11.75
Depth (in)	31.13
Front Access	Door
Height (in)	43
Hertz	60
Type	Standard
Use	Sandwich/Salad
Voltage	115
Warranty	7-year Parts & Labor; 7-year Compressor
Width (in)	48.38
Series	TSSU Series
Refrigerant	R290 (Hydrocarbon)
No. of Doors	2
Phase	1
Rating	Better
Product	Prep Tables
Product Type	Commercial Refrigeration
NEMA	5-15P
Max Pan Depth (in)	6
Weight	290.00